UV Two-Sided Curing Machine
UV Two-Sided Curing Machine, apply to EVA sole cementing and assembling, coating with UV agency and dry, through UV iradiating, UV photo initiator will divide in free radicals and induced polymerization, increase the polarity of material and get better bonding effect.
1. irradiating in a seconds, saving space, energy and eco-friendly.
2.low temperature, suitable for treatment of easy thermal deformation materials.
3.high quality, lower production costs, high production capacity, easy to operate, high stability, and nearly zero consumption rate.
4.over-temperature protection device, protect shoe materials from discoloration and deformation caused by power failure.
5.conveyor rotary speed is adjustable, adjustable knob and digital display, 3-12m/min
6.daylight like type UV lamp, with special wavelength and high intensity with time accumulation monitor, you can easy to get its service time, each lamp can be controlled independently, inspected and shown each working status on ampere meter, or automatic detecting the running of lamp.
7. front and rear section each installed with 4 lamps, each lamp separate control, also can turn off any one them and act as one side curing, lampshades in 4 sides on the top or bottom, lamp position and curing angle independently control and adjustable.
8. high eficiency and high performance, can finish two sides curing in one time and capacity per hour can more than 1000 pairs
Core Advantages for Shoe Material Production
Dual-Sided Synchronous Shadow-Free Curing: Equipped with top and bottom symmetric UV lamp groups, the machine delivers full coverage irradiation without dead corners. It thoroughly eliminates incomplete curing and shadow marks common in shoe material drip plastic and UV ink processing, ensuring consistent curing effect on both sides of shoe accessories.
LED Cold Light & No Material Damage: Adopts professional UV LED cold light source technology with ultra-low heat generation. It avoids thermal deformation, discoloration, and brittle damage to soft shoe materials, rubber parts, and textile fabrics, fully adapting to the material characteristics of various shoe accessories.
Stable Curing Quality & Low Defect Rate: High-uniformity UV light output ensures consistent curing depth and adhesion. It effectively prevents UV ink falling, glue peeling, and surface unevenness of shoe drip plastic parts, meeting the high-standard surface treatment requirements of finished shoe products.
High-Speed Automatic Production: One-pass double-sided curing omits secondary flipping and reprocessing procedures. Matched with an adjustable intelligent conveyor system, it supports fast cycle curing, greatly boosting daily output and suitable for large-batch OEM/ODM shoe accessory orders.
Intelligent PLC Easy Operation: Humanized touch screen control panel supports free adjustment of UV light intensity, conveyor speed, working time, and delay parameters. Workers can master operation quickly without professional technical training, reducing production threshold.
Durable & Low Operating Cost: Long-life LED light sources feature stable performance and ultra-low failure rate. The integrated sturdy mechanical structure adapts to long-term uninterrupted industrial operation, with minimal later maintenance costs and high cost performance.
Customizable for Diverse Shoe Products: Supports multiple mainstream UV wavelengths (365nm/385nm/395nm/405nm). Curing width, lamp height, and machine size can be customized to adapt to different sizes and curing process requirements of shoe materials, drip plastic parts, and textile accessories.
Professional Application in Shoe & Garment Accessory Industry
This double-sided UV curing machine is tailor-made for the shoe material processing industry, focusing on solving various double-sided curing pain points of shoe accessories, with wide and professional application scenarios:
Shoe Material Drip Plastic Processing: Double-sided curing for PVC drip plastic shoe ornaments, shoe logos, and soft rubber accessories, ensuring firm glue adhesion and smooth surface
Shoe Accessories UV Ink Curing: Suitable for screen printing and pad printing UV ink curing on shoe surfaces, shoe labels, and decorative parts, with bright color and no fading
Textile & Garment Auxiliaries: UV coating and glue curing for shoe fabrics, textile auxiliary materials, and elastic accessories, improving product wear resistance and aesthetics
Plastic & Hardware Shoe Fittings: Double-sided UV surface curing for plastic shoe parts and hardware shoe accessories, enhancing surface hardness and anti-scratch performance
Packaging & Craft Shoe Gifts: Surface curing for shoe gift boxes, packaging materials, and matching craft accessories, improving product grade
| Working voltage | 380V/50HZ |
| Max. power consumption | 18.00KW |
| Lamp quantity | 8 sets(one sets ontop & another on bottom) |
| Lamp capacity | 2kw |
| Lamp long | 400mm |
| Speed | 3-12m/min |
| Conveyor width | 415mm |
| N.W: | 1300kgs |
| Dimensions | 4400*1020*2100mm |
Hot Tags: uv two-sided curing machine, China uv two-sided curing machine manufacturers, factory
