China GW‑DS1999L 18 Colors Automatic Dispensing Machine Manufacturers Factory

Description

Technical Parameters

Products Description

GW-DS1999L 18 Colors Automatic Dispensing Machine

The GW-DS1999L is a high-efficiency automatic dispensing machine built for factories producing PVC patches and rubber labels. Its 18 independent dispensing nozzles support simultaneous multi-color working, eliminating the need for color changes or sequential dispensing so you get more output per hour.

Precise and stable glue output guarantees consistent product quality across every cycle. The digital control system enables simple parameter setup directly on the panel, lowering manual errors and shortening changeover time between jobs. Driven by ball screw and servo motor, the machine achieves 0.01mm XYZ location accuracy and a fast working speed of 20m/min.

With a 600×600mm table and 720×740×100mm XYZ working stroke, the machine handles a wide range of dispensing patterns. The durable mechanical structure is designed for long-time mass production of PVC patches and rubber labels, while the 1200×1170×1500mm frame fits into existing production lines without major layout changes.

Technical Specifications

Table Size	600mm × 600mm
XYZ Working Stroke	720 × 740 × 100mm
XYZ Location Accuracy	0.01mm
The Fast Working Speed	20m/min
Input Voltage	220V or 110V
Machine Size	1200 × 1170 × 1500mm
Power	1400W
Weight	360kg
Drive Mode	Ball screw + Servo motor
Input Air Pressure	0.75MPA
Dispensing Nozzles	18 independent nozzles
Packing	Export-grade wooden case

FAQ

Q1. What is the GW-DS1999L mainly used for?

A: It is designed for automatic multi-color dispensing in the production of PVC patches and rubber labels. The 18 independent nozzles support simultaneous multi-color working for high efficiency.

Q2. How do the 18 nozzles improve production efficiency?

A: With 18 independent dispensing nozzles, you can dispense multiple colors simultaneously without stopping to change glue or clean nozzles between colors. This directly translates to higher output per hour and lower labor cost per piece.

Q3. What is the working accuracy and speed?

A: The machine achieves 0.01mm XYZ location accuracy and a fast working speed of 20m/min, driven by ball screw and servo motor. This ensures precise and stable glue output for consistent product quality.

Q4. Is it difficult to set up different glue patterns?

A: No. The digital control system lets your operator input parameters directly on the panel. No programming expertise is required, and setup time is typically minutes rather than hours.

Q5. What is the power and air pressure requirement?

A: The machine runs on 220V or 110V input voltage with 1400W power, and requires 0.75MPA input air pressure. Voltage configuration can be discussed for different regional power supplies.

Q6. Do you provide operation training or videos?

A: Yes. We provide operation manuals, video guidance, and one-on-one remote support to help your team master machine operation and daily maintenance quickly.