GW-6002AM Automatic Hot Press and Cutting Machine for Hot Press Forming & Die Cutting
Automatic press and cutting machine integrating hot press forming and die cutting in one machine. The machine automatically takes the sheet material and sends it into the mold for hot pressing, then automatically performs the cutting after forming.
Why Choose the GW-6002AM Automatic Hot Press and Cutting Machine
Hot Press and Cutting in One Machine
The machine integrates hot press forming and die cutting. It automatically takes the sheet material and sends it into the mold for hot pressing, then automatically performs the cutting after forming.
Modular Mold Base Design
The machine uses a modular mold base design. The mold base uses screw-type mold change, which realizes the integrated press and cut operation. This simplifies mold changes between products.
Compact Footprint, Multi-Unit Layout
The machine has a compact design with a small footprint and a two-position layout. It can be installed in multiple units next to each other, which reduces the number of operators needed and allows 24-hour operation.
About This Automatic Hot Press and Cutting Machine
The GW-6002AM is an automatic hot press and cutting machine. It belongs to the automatic press series. The machine is used for hot press forming and die cutting of sheet materials and roll materials, and it integrates both processes in one unit.
The machine uses a modular mold base design. The mold base uses a screw-type mold change system, which realizes the integrated press and cut operation. The machine automatically takes the sheet material and sends it into the mold for hot pressing, and then automatically performs the cutting after forming. This removes the need to move the material between separate press and cutting machines.
The machine has a compact design with a small footprint and a two-position layout. Multiple units can be installed next to each other, which reduces the number of operators needed and allows the machine to run 24 hours a day. This makes it suited to large-volume production of sheet and roll materials.
The GW-6002AM uses a self-developed temperature control system for the mold temperature control part, which avoids conventional temperature control and reduces electricity usage and failure rate. The machine has a die-cut pressure of 10T×2, a mold plate size of 300 × 400 mm, and 2 mold seats. The power is 3HP and the voltage is 9kW.
This machine is an integrated press and cutting machine. It is different from the covering machine (GW-600), which combines suction and hot press, and from the seamless hot press machines (GW-593 and GW-595), which are used for hot pressing without the integrated die cutting function. If your process requires hot press forming and die cutting in one machine, the GW-6002AM is the appropriate machine.
Please contact us with your material type, product size, and production volume so we can confirm the right configuration for your production.
Technical Specifications
The table below lists the parameters of the GW-6002AM automatic hot press and cutting machine.
| Parameter | Specification |
|---|---|
| Model | GW-6002AM |
| Machine Type | Automatic press and cutting machine |
| Mold Plate Size | 300 × 400 mm |
| Mold Seat Quantity | 2 |
| Oil Pressure | 10T × 2 |
| Power | 3HP |
| Voltage | 9kW |
| Machine Dimension | 1850 × 1900 × 2000 mm (L × W × H) |
| Net Weight / Gross Weight | 2000 kg / 2010 kg |
| Control System | Self-developed temperature control system for mold temperature |
| Mold Change | Screw-type mold change, modular mold base |
| Operation | Automatic sheet feeding, hot pressing, and cutting |
| Packaging Size | To be confirmed |
| Air Pressure | To be confirmed |
| Production Capacity | To be confirmed |
Note: The GW-6002AM is the automatic press and cutting machine. It integrates hot press forming and die cutting in one machine. Packaging size, air pressure, and production capacity are to be confirmed based on the final configuration. Please contact us with your requirements for a complete specification.
Applications
Sheet Material Hot Press Forming
Hot press forming of sheet materials. The machine automatically takes the sheet and sends it into the mold for pressing.
Roll Material Hot Press Forming
Hot press forming of roll materials. The machine handles continuous feeding and pressing for roll-based production.
Integrated Die Cutting After Forming
Die cutting after hot press forming, without moving the material to a separate machine. The cutting is done automatically after the forming step.
Large Volume Production
Multiple units can be installed next to each other for large-volume production, with 24-hour operation and reduced operator requirements.
Ordering & Delivery
We supply the GW-6002AM automatic hot press and cutting machine. Before quotation, we confirm:
- Material type - the sheet or roll material to be processed.
- Product size - the size of the product, to confirm it fits the 300 × 400 mm mold plate.
- Mold requirement - the mold size and shape for your product.
- Cutting requirement - the die cutting shape and specification for the cutting stage.
- Production volume - the required output, to confirm the number of units and the multi-unit layout.
- Power supply - 9kW. Please confirm your factory voltage and frequency.
- Air supply - if the machine uses pneumatic action, please confirm your compressed air supply.
The machine dimension is 1850 × 1900 × 2000 mm. The net weight is 2000 kg and the gross weight is 2010 kg. We provide operation and maintenance documentation with each shipment. Lead time is confirmed at the quotation stage.
Frequently Asked Questions
What is the GW-6002AM used for?Need an Automatic Hot Press and Cutting Machine for Your Production?
Tell us your material type, product size, and production volume. We will recommend the right configuration and provide a detailed quotation.
Related Products & Resources
Hot Tags: automatic hot press and cutting machine, China automatic hot press and cutting machine manufacturers, factory
